About Us

Using concentrated dry blend pigment in plastics is a simple way but can be caused problems with contamination. To use dye blend pigment is moderately lack of environmental concern and difficult to clean the machine which need a lot of raw materials for cleaning while changing the color. The colored powder dust can be dispersed throughout the machine area during the production process. However, in term of production process, the customer can mix dry blend pigment with plastic pellets easily. Dry blend pigment is the most cost saving way comparing with compound and masterbatch which only need less than 1% up to 5% dosage per formulation 100kg.

Masterbatch is a combination of dry blend pigments, additives and plastics which provides concentrated pellets. Customers can use masterbatch at a ratio of 1% – 5% per formulation 100 kilograms, which does not cause contamination. To change the color can be cleaned easily and is an environmentally friendly as it does not disperse in the air. Therefore, masterbatch is widely used in Europe, America and Asia, compared to compounds. It can also be seen that the use of dye blend pigments and Masterbatch is a cost saving and less production time.

TH MasterPlast will service our customer of these 3 product types. Our main business, approximately 95% of the production capacity will be focused on making color and additive Masterbatch.

It is a method in which colored powder is mixed with each type of plastic in order to produce a specific color. Color compound product uses different types of plastic and each color must produce separately, therefore, the production costs is more costly. Color compound can be directly used 100% in production which is very easy to use but requires lots of warehouse space for keeping the product which can increases the cost of storage. Moreover, color compound is ready to use at 100% while dry blend pigment can only use less than 1% up to 5% dosage per formulation 100kg.